Classic Bay Cruiser 22
Blackwater 29
Patriot 29
Patriot 38
Mathews 40
Base Pricing
In the Press
Home
About Us
Mobile Boat Care
Yacht Brokerage
Boat Storage
Contact Us/Directions
Our Patriot 29 evolved from dozens of discussions with our families and friends over a period of several months.
Specifications
LOA - 29'
Beam - 9’2”
Draft - 34''
Approximate Weight - 7,500 lbs
return to top
Standard Features
All other components are hand laid with high grade polyester resins with PVC core
Choice of hull, deck/cabin and boot top color
Choice of nonskid color deck and cockpit
PVC rub rail painted to match hull, with stainless steel rub strake
Self-draining cockpit
Six 10" hollow base stainless steel cleats (two forward, two amidships, two aft)
Stainless steel bow roller with hawse pipe
Teak toe rail
Teak/painted ceiling in cockpit
PVC spray rails
Custom teak signature eyebrow molding
Custom teak coaming cap
Teak eyebrow on hardtop
Tinted Bomon custom windows
All ports, hatches, windows have clear anodized finish
Cabin with 20x20 Lewmar hatch over V-berth
Four opening ports in cabin
Molded engine box with 1 1/2" Soundown insulation
Two coats of antifouling paint applied to bottom
Two three loop teak handrails on cabin trunk
Solid hand laid fiberglass hull with vinylester skin and high grade polyester resins
Highly tinned multi-strand boat cable used throughout
DC distribution panel with two-way battery switch, 8 circuits
Two AGM batteries with switch
VHF with antenna, ICOM M-402
Windlass/fast set anchor w/rode
Bow thruster
Spot light, dual electric horn
Dual pedestal helm seating
Custom molded seat platforms w/storage
Full beam aft seat
Aft seat storage areas
Teak companionway door with sliding Lexan hatch
Custom 15x40 inch storage/coolers in cockpit (2) with diaphragm pump to overboard discharge
Molded instrument/electronics panel with Faria performance gauges, compass, etc.
Two cockpit access hatches to below decks
Counter with stainless steel sink and faucet
Custom Teak drink/storage holder port helm
Varnish bright work – 7 coats
Flag, pole, hardware
Safety package(2extinguishers, ring buoy w/line, air horn, 3day/night flares, 6 adult vests
V-berth with storage areas below with 4 drawers and two access panels to bilge
Custom hand-crafted cherry cabinetry and trim
All cabinetry has push/pull brass locks
Hanging locker
Counter with stainless steel sink and cold water faucet
Cold fresh water pressure system with 20 gallons capacity and 12v 2.8 Shurflo pump
Cabinetry with drop-down sponge shelf, three drawers, storage access door, custom slide-out trash cabinet
Two day/night dome lights
Two brass reading lights mounted on bulkhead at V-berth, under deck courtesy lights in V-berth
Fully enclosed head with teak trim
Electric marine head with 20 gallon holding tank, y-valve and stainless steel pump out plate
Volvo D4 260hp electronic shift engine
Uflex single lever engine control
Teleflex Seastar hydraulic steering system
Five spoke, 15” stainless steel steering wheel
Fully protected prop and rudder with zinc
Prop: 19DIAx22Px1 1/2 bore, 1 1/2" Aquamet22 SS shaft, cast strut, rudder & shoe
94 gallon fuel capacity
Two diaphragm bilge pumps with auto float switch and manual override
All underwater thru hulls are standard Groco seacocks
Top quality marine hoses with double clamp protocol
Trim tabs
Two seven loop teak handrails on hard top
Coast guard approved navigational lights, LED port/starboard running lights, combo anchor/steaming light, stern light.
return to top
Sample Options
I/O Volvo with transom alteration
Stainless Steel bow rail
Fishing rod holders
Teak cockpit flooring
Teak drink holder/fold up table (engine box)
Teak coaming
Swim platform.(teak or molded)
AC electrical package (Panel w/three circuits, GFI outlet, 30amp outlet, 20amp chgr.)
return to top
Patriot 29
Specifications
Standard Features
Options
© 2010 Mathews Brothers LLC - 408 N 10th St. | Denton, MD 21629 | Tel: 410.479.9720 | Fax: 410.479.9722
Our Patriot 29 evolved from dozens of discussions with our families and friends over a period of several months.
